Wiring and Device Connections
13
TPI-PRO Total Presentation Interface - Pro Edition
6. Cycle power the unit. Cycle powering the unit allows it to detect the new configuration.
Example 2 (Mouse Pass-Thru Control)The example below displays a typical installation for using a touch panel for mouse pass-thru control.
To enable a touch response on a panel page routed through a computer, you must enable pass-thru
control. Pass-thru control enables the TPI-PRO to act as a control bridge between a computer and a
monitor (typically with no touch features, such as a CRT computer monitor.)
FIG. 9 System Installation Example 2 (Mouse Pass-Thru Control)
Ethernet
PC
CRT Monitor NetLinx Master
Signal video feed
from the computer
to the monitor
through the
TPI-PRO.
Type-B USB cable
between PC and
TPI-PRO (control
is on panel pages
on the computer
and displayed on
the monitor)
From USB Mouse/
computer pages
routed for viewing
through monitor)
Connect VGA Output
to CRT Monitor
keyboard input
device (controls
actions on