SECTION 4 OPERATING INSTRUCTIONS
4.9.3 Recalling Memory Contents
You can recall memory contents by operating the number keys, step keys, and the rotary knob.
Pressing the [Memory] key in the Entry zone turns on the lamp of the [Memory] key and the Memory lamp in the
Edit zone, leaving the unit ready to recall memory contents via the number keys, and the step key and rotary knob
in the Edit zone.
(1) Setting by number keys
You recall memory contents by entering numeric values (address) via number keys and the [GHz/dBm] (Recall)
key.
(2) Setting by step keys
You operate the step keys [^][∨] to step up or down memory addresses already stored in order to recall memory
contents continuously.
If any memory block was excluded from the continuous recall, all the memories of that block are skipped, and
those of the following block are recalled.
(3) Setting by rotary knob
Turning the rotary knob raises or lowers memory addresses already stored to perform memory recall continuously.
If any memory block was excluded from the continuous recall, all the memories of that block are skipped, and
those of the following block are recalled.
MG3641A/MG3642A front panel
[Memory] key