Z-1200II:Your model includes a mounting bracket designed for overhead installation; it may be installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, it is important that the fog does not shoot directly at any one’s face. Whatever installation method you choose, do not allow the unit to have more than a 25 degree angle of inclination.

Z-1200II Description

Note: If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the external fuse, remote control connection and power from the wall. If all of the above appears to be O.K., plug the unit again. If fog does not come out after holding the remote button down for 30 seconds, check the hose attached to the tank to make sure there is fluid going through the hose. If you are unable to determine the cause of the problem, do not simply continue pushing the remote button, as this may damage the unit. Return the machine to your ANTARI dealer.

Technical Specifications
ModelZ-1200II
Power Supply

AC 100~120V or AC 220~240V, 50/60 Hz

Power Consumption

1200 W

Output Volume

18,000 cu. ft/min.

Tank Capacity

2.5 liters

Fluid Consumption

15 min./ liter (100% output)

Weight

10.9 kgs

Dimensions (mm)

L458 W243 H177

Remote Included

Z-8

Warm-up Time

9 mins

Remote Control Operation

4