♦Z-8:25 feet wired multi-function remote control with 4-PIN plug for ANTARI Fog Machine model Z-1200II.

The Interval knob adjusts the time between discharges when the timer function is engaged. The range is from 10 seconds to 250 seconds.

The Volume knob controls the volume of the fog produced. The range is from 0% - 100% of maximum output.

Adjust the Duration control knob of each fog emission (within the range of 1 to15 seconds).

The yellow TIMER button controls the timer function. Depress the button to activate. When activated, the yellow light will turn ON. Adjusting the interval knob will determine the time between fog output (10 – 250 seconds). The duration of output is set at 15 seconds. The volume can be adjusted using the volume knob to control the amount of fog produced.

The red CONTINUOUS button sets the machine to constant fog production. To activate this function, depress the red button. The volume knob can be used to regulate the volume of the steady stream of fog produced.

The green MANUAL button will produce a continuous blast at maximum volume while the button is held down. When released, the manual function stops and the machine will return to the previous setting; timer, continuous, or stationary.

Note: The continuous function will override the Timer function. Therefore, if both buttons have been depressed the Z-1200II will fog continuously. The manual function overrides all functions. When depressed and held down the Z-1200II will fog at maximum volume for as long as the button is held down, regardless of the machine’s setting at the time.

25 feet

5