One example of AHCI configuration – your motherboard may vary
B.LOADING THE FLEET-SWAP BAYS
Fleet-Swap™ bays are designed to be accessible from the front of the case, through the Fleet-Release™ access doors.
1.Open the Fleet-Release™ access door, and insert your 3.5” SATA device into a 3.5” drive bay that contains a Fleet-Swap bay at the back.
2.Push gently until it engages the adapter pins on the Fleet-Swap bay and stops in position. Do not secure the device with screws if you want it to be removable.
Loading a Fleet-Swap drive.
3.Mount any other 3.5” HDD devices accordingly.
4.Close the Fleet-ReleaseTM Access Door.
C. UNLOADING THE FLEET-SWAP™BAYS
1.Ensure that your HDD is not in use.
2.Open the Fleet-ReleaseTMAccess Door by pressing the left side to release it, and then swing it open.
20
