2.9
EXTERNAL 5.25” DEVICE INSTALLATION
There are three externally accessible 5.25” drive bays. Before you begin, remove both side panels.
1.First, remove the drive bay faceplate and metal cover plate as shown below.
The plastic drive bay faceplate should pop free.
A screwdriver may be needed to remove the metal cover plate.
2.Slide your 5.25” device into the bay from the front of the case.
5.25” device installation
3.Secure the drive into position in the drive bay using the provided screws on each side of the drive.
4.Mount any other 5.25” devices accordingly.
5.Connect the appropriate power and data cables to your device(s).
6.Replace both side panels.
23
