Antunes, AJ VCT-1000 owner manual Table of Contents, Owner Information

VERTICAL CONTACT TOASTER

TABLE OF CONTENTS

Owner information	2
General	2
Warranty Information	2
Service/Technical Assistance	3
Important Safety Information	4
Specifications	5
Electrical Ratings	5
Electrical Cord & Plug Configurations	5
Model Designation	5
Dimensions	6
Installation	7
Unpacking	7
Assembling the Unit	7
Installing the Optional Belt Wraps and Roller
Tensioners	8
Equipment Setup	9
Operation	10
Operating Instructions	10
Safety Features	10

Maintenance	11
Daily	11
Replacing the Release Sheet (Every 4 - 6 weeks) 12
Replacing Optional Belt Wraps and Measuring the
Conveyor Belt Chains and Optional Roller Tensioners
(Every 3 - 6 months)	12
Conveyor Belt Chains	13
Adjusting conveyor Belt Chains	13
Replacing the Optional Roller Tensioners	14
Replacing the Spring Tensioners	14
Measuring the Optional Roller Tensioners	14
Troubleshooting	15
Wiring Diagram	17
Replacement Parts	18
Optional Parts – VCT-1000	23
LIMITED WARRANTY	24

OWNER INFORMATION

General

The Vertical Contact Toaster, Model VCT-1000, is designed for contact toasting of buns. The toaster design allows the operator to place buns on both sides of the heated Platen at the same time. Buns are placed into the top of the toaster and uniform, golden brown, warm buns are then retrieved at the bottom of the toaster in approximately 10 seconds.

This manual provides the safety, installation and oper- ating procedures for the Vertical Contact Toaster. We recommend that all information contained in this manu- al be read prior to installing and operating the unit.

Your Vertical Contact Toaster is manufactured from the finest materials available and is assembled to Roundup’s strict quality standards. This unit has been tested at the factory to ensure dependable trouble-free operation.

Warranty Information

Please read the full text of the Limited Warranty in this manual.

If the unit arrives damaged, contact the carrier imme- diately and file a damage claim with them. Save all packing materials when filing a claim. Freight damage claims are the responsibility of the purchaser and are not covered under warranty.

The warranty does not extend to:

•Damages caused in shipment or damage as result of improper use.

•Installation of electrical service.

•Normal maintenance as outlined in this manual.

•Malfunction resulting from improper maintenance.

•Damage caused by abuse or careless handling.

•Damage from moisture into electrical components

•Damage from tampering with, removal of, or changing any preset control or safety device.

IMPORTANT! Keep these instructions for future reference. If the unit changes

ownership, be sure this manual accompanies the equipment.

2 P/N 1010807 Rev. E 06/06