Connection and preparation of TV set
Mounting the TV set to a wall
This unit conforms to VESA standards for wall mounting. Please refer to the specification page for the wall hanging dimensions.
In case of wall mounting, use the OEM wall hanging bracket and have specialized personnel carry out mounting in order to ensure your safety and to prevent damage to the TV set.
To hang the TV set on the wall, all connecting wires must be inserted into the interface of the TV set first. At least a 6 cm gap must be kept between the TV set and the wall surface to ensure sufficient space for all the interfaces to be inserted.
Wherever you place or hang the TV set, ensure that air can circulate freely through the air duct.
Do not place the TV set inside an enclosed space.
Power connection
Insert one end of the power cord into the hole “Power In” of the adapter, and connect the other end to a 220V main supply socket, then insert the DC Power Out port of the power adaptor into the "Power In" hole in the lower rear part of the unit.
Never place the TV set on the AC power cord. Otherwise, fire disaster or electric shock may occur.
The TV set will still consume some power when it is in standby state while power is on.
When the TV set is not used for a long period of time, it is preferable to pull the power cord out of the power socket.
