1Smart-UPS® VT and MGE™ Galaxy™ 3500 10-30 kVA 208 V MBP Installation
Safety

SAVE THESE INSTRUCTIONS

This manual contains important instructions for the Smart-UPS® VT and MGE™ Galaxy™ 3500 series
that should be followed when handling the Maintenance Bypass Panel with Power Distribution (wall-
mount).
This UL-listed unit was designed to operate in conjunction with the Smart-UPS VT and MGE Galaxy
3500 10-30kVA, 208V UPS.

Safety warnings

Warning: Only APC by Schneider -trained personnel who are familiar with the
construction and operation of this equipment, as well as the mechanical and electrical
hazards involved, may perform this installation.
Warning: This installation must comply with the requirements of ANSI/NFPA 75 and
NEC/NFPA 79 Art. 645.
Warning: All safety codes, safety standards, and other regulations must be strictly
observed during installation and ongoing maintenance of this equipment.
Warning: Prior to installing the Smart-UPS VT or MGE Galaxy 3500 Maintenance
Bypass Panel, de-energize all external power being supplied to the UPS!
Warning: Ensure that no electrical power is connected to the Maintenance Bypass
Panel, and that all switches are in the OFF position before installing or servicing this
unit!
Warning: All wiring instructions must be followed precisely. Failure to comply could
result in permanent damage to the equipment!
Warning: When installing this unit to a wall, avoid contact with previously installed
electrical wires and other potential hazards that might be embedded in the wall!