APC 78-10169-02 manual SetUPSHostName -HostName Name

Chapter 2 Monitoring the System

Monitoring a UPS

Step 32 Log in as an administrator (userID administrator), and enter your password (the default is changeme).

Step 33 Enter the following command to stop the FMMServer on the SPE:

net stop FmmServer

Step 34 Change to the FMM directory:

cd Program Files\Cisco Systems\ics\FMM

Step 35 Install the UPS:

installups

Step 36 Start FmmServer:

net start FmmServer

Step 37 Set the host name of the UPS, where Name is the UPS IP address:

SetUPSHostName -HostName Name

Step 38 Continue with “Verifying That the Cisco ICS 7750 Can Communicate with the UPS” on page 2-26 .

Verifying That the Cisco ICS 7750 Can Communicate with the UPS

Complete the following steps to verify that the Cisco ICS 7750 can communicate with the UPS:

Step 1 On the PC, choose Start > Run.

Step 2 Open a Telnet session with the SPE running System Manager: telnet IP address 5000

Step 3 Log in as an administrator (userID administrator), and enter your password (the default is changeme).

Step 4 Change to the FMM directory:

cd Program Files\Cisco Systems\ics\FMM

	Cisco ICS 7750 Administration and Troubleshooting Guide
2-26	78-10169-02 Rev. B0