APC AP5816 Scan Duration, SCAN-SKIP Mode, Hotkey, Command Mode, OSD Language, Touchpad

Setting	Function
PORT ID DISPLAY	Selects how the port ID is displayed: the port number plus the port name (PORT
MODE	NUMBER + PORT NAME) (default); the port number alone (PORT NUMBER);
	or the port name alone (PORT NAME).
SCAN DURATION	Determines how long the focus dwells on each port as it cycles through the selected
	ports in Auto Scan mode (see “F7: SCAN” on page 17). Key in a value from 1-255
	seconds, then press the Enter key. Default is 5 seconds; a setting of 0 disables the
	SCAN function.
SCAN-SKIP MODE	Selects which servers will be accessed under Skip mode (see “F5: SKP” on
	page 16), and Auto Scan mode (see “F7: SCAN” on page 17). Choices are:
	ALL - All the ports which have been set accessible (see “SET ACCESSIBLE
	PORTS” on page 15)
	QUICK VIEW - Only those ports which have been set to accessible and have been
	selected as quick view ports (see “SET QUICK VIEW PORTS” on page 16)
	POWERED ON - Lists only the ports which have been set to accessible and have
	their attached servers powered on
	QUICK VIEW + POWERED ON - Lists only the ports that have been selected as
	quick view ports, and that have their attached servers powered on.
	Note: The quick view choices only show up on the administrator’s screen, since
	only he has Quick View setting rights (see “SET QUICK VIEW PORTS” on
	page 16 for details)

SCREEN BLANKER Enter a value from 1 to 30 minutes, then press the Enter key. The function will cause the screen to go blank when the selected amount of time has elapsed with no input from the console. The default setting of 0 disables the function.

HOTKEY	Select Y (for Yes) to enable and N (for No) to disable the hotkey command
COMMAND MODE	function then press the Enter key in case a conflict occurs with programs running
	on the servers.
HOTKEY	Sets the keyboard shortcut for invoking Hotkey Mode (see page 18). Choices are:
	[NUM LOCK] + [-] (minus) (default), and [CTRL] + [F12].
OSD LANGUAGE	Sets the language used in the OSD. Choices are: English, German, French,
	Spanish, and Russian. Scroll through the list with the arrow keys or move the
	highlight bar to the language choice and press the Enter key
TOUCHPAD	Select Y (for Yes) to enable and N (for No) to disable the touchpad, then press the
	Enter key.

14 Rack LCD Console KVM Switch User’s Manual