4 NetBotz 455 Installation and Quick Configuration Manual
Physical DescriptionFront
Item Description
Vented internal
sensors Vented opening for airflo w, temperature, and humidity sensors.
Network link LED Shows the status of the network connection. Bli nks to indicate network
traffic (green—connected at 10 Mbps; yellow— connected at 100 Mbps).
Power LED Indicates whether the unit is receiving power (g reen—receiving power;
dark—not receiving power).
Camera LED Blinks steadily when the integrated camera is active.
Alert LED Indicates the alert status of the system. When more than one alert exists,
the most severe will be indicated.
• Flashing once every eight seconds—Informational
• Flashing once every four seconds—Warning
• Flashing once every two seconds—Error
• Flashing once every second—Critical
• Flashing twice per second—Failure
Temperature
display
• Displays the current temperature from 0 to 99 in Centigrade or
Fahrenheit. Temperature reading from in ternal temperature sensor. If
the temperature exceeds 99, the display will flash 99.
• When the unit first receives power, displ ays the unique identifier
number for one minute.
• If an alert exists, flashes at the same rate as the Alert LED.
• During a firmware upgrade, displays 88.
Lens housing Must be removed to change the focus of the inte grated camera.