NetBotz 455 Installation and Quick Configuration Manual 5

Rear

Item Description

Microphone jack Supports audio sens ing, audio record ing, and two-way au dio.
Maximum length of microphone cable: 3 m (9.8 ft).
Speaker jack Supports two-way audio.
Maximum length of speaker cable: 3 m (9.8 ft).
A-Link port Used for cascading NetBotz sensor pods and temperature and humidity
sensors with digital displays. Provides communications and power to the
connected devices over standard CAT-5 cabling with straight-t hrough
wiring. For details, see “Connect Sensors and Sensor Pods to A-Link
Ports” on page14.
10/100 Base-T
network port Provides for a 10/100 Base-T network connection and power through
Power-over-Ethernet (PoE). Statu s and link LEDs indicate network
traffic:
• Status LED—blinks orange and green at start-up; indi ca tes th e st atus of
the network connection (solid green —IP address established; blinking
green—attempting to obtain an IP a ddress).
• Link LED—blinks to indicate network traffic (green—connected at 10
Mbps; orange—connected at 100 Mbps).
Sensor ports (4) Used for connecting APC sensors, third-party dry-contact sensors, and
standard third-party 0-5 V sensors. Third-party dry-contact state sensors
require the NetBot z Dry Contact Cab le (NBES0304). Sta ndard
third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable
(NBES0305).