PC Menu Adjustments
In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC.
Recommended resolution is 1,980 x 1,080. For use with a laptop computer, refer to your computer’s owner manual on instruction for proper
display output. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable
for stereo sound. See page 14 for details.
How to Navigate:
After connecting to a PC, press the VGA button on your remote control. Press the MENU button on the remote control and navigate using
arrow t u buttons to select SETUP. Gain access to position adjustment options by pressing the down q arrow button to highlight
Advanced, then press u arrow button to select from the following options.
• Highlight V-Pos. Navigate
using the t u arrow but-
tons to adjust the position
of images displayed up and
down.
• Highlight Clock. Navigate
using the t u arrow buttons
to control the width of the
image.
• Highlight H-Pos. Navigate
using the t u arrow but-
tons to adjust the position of
images displayed from side
to side.
• Highlight Auto. Press the u
arrow button to automatically
adjust the display to the best
setting. When prompted,
select Yes to conrm.
• Highlight Phase. Navigate
using the t u arrow buttons
to improve focus and image
stability.
When prompted, Select “Yes” to conrm.
Setup Menu
23 24