Apple 073-0704 manual Push the stand forward. Tighten the second screw, Tighten the third screw

Models: 073-0704

1 13

Page 11

Stand Installation - 11

Image 11

Contents

 eMac Computers Stand Installation Tools RequiredNo tools are required. The tool is supplied with the stand Installing the Optional Stand3. Unplug all cables To install the eMac standStand Installation 1. Save open documents and quit all open applicationsStand Installation 6. The stand attaches to the locations circled below7. Remove the screw located between the computer’s feet Stand Installation 8. Position the stand on top of the screw holesStand Installation 11. Slide the stand forward to access the two rear screws10. Tighten the ﬁrst screw Stand Installation 12. Tighten the screw on the left 13. Tighten the screw on the rightStand Installation 14. Carefully turn the computer overeMac ATI Graphics and eMac USB 2.0 Installation Procedure To install the eMac ATI Graphics or eMac USB 2.0 stand6. The stand attaches to the locations circled below 7. Remove the screw circled belowStand Installation Stand Installation 8. Position the stand in place over the screw holesStand Installation 10. Push the stand forward. Tighten the second screw11. Tighten the third screw Stand Installation 12. Carefully turn the computer over Apple Computer, Inc