Apple 073-0704 Remove the screw circled below, The stand attaches to the locations circled below

Models: 073-0704

1 13

Page 9

6. The stand attaches to the locations circled below.

Stand Installation - 9

Image 9

Contents

No tools are required. The tool is supplied with the stand Tools RequiredInstalling the Optional Stand  eMac Computers Stand InstallationStand Installation To install the eMac stand1. Save open documents and quit all open applications 3. Unplug all cables6. The stand attaches to the locations circled below 7. Remove the screw located between the computer’s feetStand Installation Stand Installation 8. Position the stand on top of the screw holes11. Slide the stand forward to access the two rear screws 10. Tighten the ﬁrst screwStand Installation Stand Installation 12. Tighten the screw on the left 13. Tighten the screw on the rightStand Installation 14. Carefully turn the computer overeMac ATI Graphics and eMac USB 2.0 Installation Procedure To install the eMac ATI Graphics or eMac USB 2.0 stand7. Remove the screw circled below Stand Installation6. The stand attaches to the locations circled below Stand Installation 8. Position the stand in place over the screw holes10. Push the stand forward. Tighten the second screw 11. Tighten the third screwStand Installation Stand Installation 12. Carefully turn the computer over Apple Computer, Inc