Apple 073-0704 manual Carefully turn the computer over, Stand Installation

Models: 073-0704

1 13

Page 7

Stand Installation - 7

Image 7

Contents

 eMac Computers Stand Installation Tools RequiredNo tools are required. The tool is supplied with the stand Installing the Optional Stand3. Unplug all cables To install the eMac standStand Installation 1. Save open documents and quit all open applications7. Remove the screw located between the computer’s feet 6. The stand attaches to the locations circled belowStand Installation Stand Installation 8. Position the stand on top of the screw holes10. Tighten the ﬁrst screw 11. Slide the stand forward to access the two rear screwsStand Installation Stand Installation 12. Tighten the screw on the left 13. Tighten the screw on the rightStand Installation 14. Carefully turn the computer overeMac ATI Graphics and eMac USB 2.0 Installation Procedure To install the eMac ATI Graphics or eMac USB 2.0 standStand Installation 7. Remove the screw circled below6. The stand attaches to the locations circled below Stand Installation 8. Position the stand in place over the screw holes11. Tighten the third screw 10. Push the stand forward. Tighten the second screwStand Installation Stand Installation 12. Carefully turn the computer over Apple Computer, Inc