Manuals / Apple / Computer Equipment / Computer Accessories

Apple 073-0704 manual Carefully turn the computer over, Stand Installation

Models: 073-0704

1 13

Download 13 pages 42.66 Kb

Page 12

12. Carefully turn the computer over.

12. Carefully turn the computer over.

Stand Installation - 12

Image 12

Apple 073-0704 manual Carefully turn the computer over, Stand Installation

Contents

Tools Required No tools are required. The tool is supplied with the standInstalling the Optional Stand  eMac Computers Stand InstallationTo install the eMac stand Stand Installation1. Save open documents and quit all open applications 3. Unplug all cables6. The stand attaches to the locations circled below 7. Remove the screw located between the computer’s feetStand Installation 8. Position the stand on top of the screw holes Stand Installation11. Slide the stand forward to access the two rear screws 10. Tighten the ﬁrst screwStand Installation 12. Tighten the screw on the left 13. Tighten the screw on the right Stand Installation14. Carefully turn the computer over Stand InstallationTo install the eMac ATI Graphics or eMac USB 2.0 stand eMac ATI Graphics and eMac USB 2.0 Installation Procedure7. Remove the screw circled below Stand Installation6. The stand attaches to the locations circled below 8. Position the stand in place over the screw holes Stand Installation10. Push the stand forward. Tighten the second screw 11. Tighten the third screwStand Installation 12. Carefully turn the computer over Stand Installation Apple Computer, Inc