Manuals / Apple / Computer Equipment / Computer Accessories

Apple 073-0704 manual Position the stand on top of the screw holes, Stand Installation

Models: 073-0704

1 13

Download 13 pages 42.66 Kb

Page 4

8. Position the stand on top of the screw holes.

8. Position the stand on top of the screw holes.

9.Note: The stand slides back and forth. To attach the ﬁrst screw, slide the stand toward the back of the computer.

Stand Installation - 4

Image 4

Apple 073-0704 manual Position the stand on top of the screw holes, Stand Installation

Contents

Tools Required No tools are required. The tool is supplied with the standInstalling the Optional Stand  eMac Computers Stand InstallationTo install the eMac stand Stand Installation1. Save open documents and quit all open applications 3. Unplug all cables7. Remove the screw located between the computer’s feet 6. The stand attaches to the locations circled belowStand Installation 8. Position the stand on top of the screw holes Stand Installation10. Tighten the ﬁrst screw 11. Slide the stand forward to access the two rear screwsStand Installation 12. Tighten the screw on the left 13. Tighten the screw on the right Stand Installation14. Carefully turn the computer over Stand InstallationTo install the eMac ATI Graphics or eMac USB 2.0 stand eMac ATI Graphics and eMac USB 2.0 Installation ProcedureStand Installation 7. Remove the screw circled below6. The stand attaches to the locations circled below 8. Position the stand in place over the screw holes Stand Installation11. Tighten the third screw 10. Push the stand forward. Tighten the second screwStand Installation 12. Carefully turn the computer over Stand Installation Apple Computer, Inc