5If there are security screws on the vertical plate on the back of the computer, remove them with a Phillips screwdriver.

If there are security screws, remove both screws from the vertical plate

6Unplug the power cord from your computer.

7Swing the handle out from its storage position. Then grasp the handle and gently but firmly pull it toward you.

The vertical plate and the logic board to which it’s attached slide all the way out of the computer. Carefully support the logic board as it comes out, and put it on a clean, flat, stable surface.

What you do next depends on the type of expansion card you want to install.

94Appendix B

Page 102
Image 102
Apple 6200 series manual Appendix B