4Touch metal inside the computer to protect the computer from damage caused by electrostatic discharge.

Important: Always discharge static electricity before you touch any parts or install any components inside the computer. To avoid generating static electricity, do not walk around the room until you have finished installing the memory and closed the computer.

5Disconnect the power cord from the computer.

6Insert the memory module into the memory slot. The module fits into the slot only one way. Be sure to align the notch on the module with the small notch inside the slot.

With the ejectors in the open position, push down on the memory module until it locks into place. The ejectors will automatically close.

Chapter 4 Enhancing Your Computer

39

Page 39
Image 39
Apple EMac manual Enhancing Your Computer