Apple EMac manual Other Problems, If you have a problem with an application

Models: EMac

1 88
Download 88 pages 53.56 Kb
Page 52
Image 52
Other Problems

52

Other Problems

If you have a problem with an application

For problems with software from a manufacturer other than Apple, contact the manufacturer. Software manufacturers often provide updates to their software on their websites. You can configure your eMac to automatically check for and install the latest Apple software using the Software Update pane of System Preferences. For more information, choose Help > Mac Help and search for “software update.”

If you have trouble using AirPort wireless communication

Make sure you have properly configured the software according to the instructions that came with your AirPort Extreme Card or AirPort Base Station.

Make sure the computer or network you are trying to connect to is running and has a wireless access point.

Make sure you are within antenna range of the other computer or the network’s access point. Nearby electronic devices or metal structures can interfere with wireless communication and reduce this range. Repositioning or rotating the computer may improve reception.

Check the AirPort signal level. There are up to four bars in the AirPort status icon in the menu bar.

You may experience network performance problems if a microwave oven, cordless phone, or other source of interference is used frequently near your base station. To minimize interference, move the base station away from the device.

For more information on using and troubleshooting AirPort, choose Help > Mac Help, then choose Library > AirPort Help.

If you have trouble ejecting a disc

Quit any applications that may be using the disc and try again. If that doesn’t work, restart the computer while holding down the mouse button.

If you have problems with your Internet connection

Make sure your telephone line or network cable is connected and functioning properly.

If you are using a dialup Internet connection, make sure that your telephone cord is plugged into the modem port (marked with the icon W) and not the Ethernet port (marked with the icon G).

See “Connecting to the Internet” on page 61 for information on setting up your computer to connect to the Internet. There you will find how to locate your Internet settings and the contact information for your Internet service provider (if you used the Setup Assistant to get your Internet account).

See “Troubleshooting Your Connection” on page 77 for more information if you have problems with your Internet connection.

Chapter 5 Troubleshooting

Page 52
Image 52
Apple EMac manual Other Problems, If you have a problem with an application, If you have trouble ejecting a disc