iMac G5 (20-inch iSight) Take Apart —Power Supply, DC/DC, Inverter 112
Removing the DC/DC Power Supply/Inverter
Using a torx T10 screwdriver, remove the two power supply, DC-DC inverter screws 1.
connecting the board to the rear housing. Disconnect the two cables; one going to the AC-
DC power supply and the other connecting to the hard drive.
Remove just the circled chassis screws, one of which is the AC lter ground screw. Carefully 2.
lift the chassis frame just enough to pull the inverter cable from under the metal chassis.