iMac G5 (20-inch iSight) Troubleshooting — General Info 140
Turn over the unit and place it screen-up, with the bottom facing toward you.4.
Tilt up the front bezel and use a T8 torx screwdriver to remove the three bezel mounting 5.
screws.
Stand up the unit. Using the plastic access card, unhook the bezel locking mechanism in one 6.
upper corner of the front bezel, and pull the bezel slightly away from the rear housing.
Note: You must Insert the access card through the vent in the rear housing as shown below,
and push it up and back until the latch releases.