iMac G5 (20-inch iSight) Take Apart —Camera and IR Cable 119
Replacing the Camera and IR Cable
Insert the two-headed end of the camera cable through the access hole in the upper EMI 1.
Faraday shield.
Route the camera cable as shown below. Tape the camera cable to the rear housing. 2.
Replace the optical drive, ex drive cable and screws, and optical drive sensor cable.3.
Replace the logic board.4.
Replace the speakers.5.
Replace the display panel.6.
Replace the IR Board.7.
Replace the lower EMI shield.8.
Replace the front bezel.9.
Replace the memory access door.10.
Replace the front bezel.11 .
Replace the memory access door.12.