iMac G5 (20-inch iSight) Troubleshooting — Symptom Charts 156
Display
When displaying a single color over the screen area, the LCD panel shows one or more pixels
that are not properly lit
Active-matrix LCD technology uses rows and columns of addressable locations (pixels) that
render text and images on screen. Each pixel location has three separate subpixels (red, green,
and blue) that allow the image to be rendered in full color. Each subpixel has a corresponding
transistor responsible for turning the subpixel on or o.
There are typically millions of these subpixels on an LCD display. For example, the LCD panel used
in the Apple Cinema HD display is made up of 2.3 million pixels and 6.9 million red, green, and
blue subpixels. Occasionally, a transistor does not work perfectly, which may result in the aected
subpixel being turned on (bright) or turned o (dark). With the millions of subpixels on a display,
it is quite possible to have a low number of faulty transistors on an LCD. Therefore, a certain
number of subpixel anomalies is considered acceptable. Rejecting all but perfect LCD panels
would signicantly increase the retail price for products using LCD displays. These factors apply
to all manufacturers using LCD technology—not just Apple products.
To determine whether or not the display has an acceptable number of pixel anomalies, follow the
steps below:
Set the display image to one of the following colors: all-white display, all-red display, all-green 1.
display, or all-blue display.
Using a jeweler’s loupe, pocket microscope, or other magnifying device, identify and count 2.
each subpixel anomaly:
• Bright subpixel anomaly = subpixel that is always on
• Dark subpixel anomaly = subpixel that is always o
Important: 3. Check the number of subpixel anomalies with the following chart:
LCD Size
(inches)
Acceptable Number of Subpixel
Anomalies
Replace the Display
Bright Dark Both Bright Dark Both
17 to 20 up to 4 up to 6 up to 8 5 or more 7 or more 9 or more
If the number of subpixel anomalies exceeds the acceptable number listed in the chart, 4.
replace the LCD panel.
If the number of subpixel anomalies is acceptable, explain to the customer that the pixel 5.
anomalies are within specications, and no repair is necessary.
Important: Do not release the specications to customers. Instead, inform them that a
certain number of subpixel anomalies is considered acceptable, and these factors apply to all
manufacturers using LCD technology—not just Apple products.