Apple G5 - page 17

iMac G5 (20-inch iSight) Take Apart — Access Door 17
Removing the Access Door
Raise the stand and use a Phillips #2 screwdriver, to loosen the two captive access door 1.
screws.
Warning: The ambient light sensor is located between the two screws, as shown in the
graphic. Don’t mistake the ambient light sensor for a screw. Sticking a screw driver or other
sharp object in the ambient light sensor could damage the computer.
Remove the access door. 2.
Replacing the Access Door
Replace the access door using it to push the rings into the memory compartment.1.
Use a Phillips #2 screwdriver to tighten the captive screws.2.