Plugging in the computer
Plug in the Macintosh before connecting anything to it. The plug grounds the computer and protects it from electrical damage while you are setting up.
SImportant: To protect both yourself and the computer from electrical hazards, the computer should remain turned off until you are finished connecting its parts. Check the main power switch at the back of the computer. Make sure that the bottom of the switch (marked with an “j”) is pressed in. S
Main power switch
1.Plug the socket end of the power cord into the recessed power plug (marked with the symbol ≤) on the back of the computer.
SImportant: Be sure at least one end of the power cord is within easy reach so that you can unplug the computer easily when you need to. S
2.Plug the other end of the power cord into a
Socket end of the power cord
Power cord plug
2
