2.1

Chapter 2INSTALLATION

This chapter contains all the information you will need to install your MultiRam C Card. Package Contents, card care instructions, a physical description, and instructions for RAM additions and card installation are covered.

UNPACKING THE MULTIRAM C CARD

Check the contents of your MultiRam C package to be sure you have the following

—This owner’s manual

—MultiRam C Card

—Six plastic support posts (2 long and 4 short)

—A floppy disk, containing:

Side 1 — AppleWorks memory expansion program

Side 2 — Utilities which include DOS 3.3 and ProDOS RAM disk drive emulator programs, and a RAM test program

- A warranty card

Contact your dealer or Checkmate Technology if anything is missing.

You should fill out and return your warranty registration card as soon as possible. Only registered owners will be notified of updates to the software packaged with the MultiRam C Card.

CARD CARE

Always ground yourself before handling or touching the MultiRam C Card. Touch any metal object to discharge static electricity from your body. Static electricity, which can build up on your body, can damage RAM chips. The 256k RAM chips installed on your card are more sensitive to damage by stat electricity than 64~ chips.

Handle the MultiRam C Card carefully, by the edges. Do not flex your card while handling it as this can lead to weakening of connections.

Avoid touching the connector pins on the bottom of the card. These pins must kept clean and straight as they are inserted into two sockets on the motherboard to connect MultiRam C to the Apple. Do not remove the anti—static foam covering the ends of the pins until you are ready to install the card. you remove the card from the //c for any reason. reinsert the anti—static to over the ends of the pins to protect them from damage.