V

Preface

H O W T O U S E T H I S M A N U A L

This manual is divided into four parts.

Part 1

GETTING STARTED, should be read first by everyone. Chapter 1 summarizes MultiRam C’s features and minimum hardware requirements. Chapter 2 gives step—by—step instructions for installing MultiRam C and adding memory to the card. Chapter 2 is required reading for those who intend to install their own RAM. Chapter 3 covers testing and troubleshooting procedures.

Part 2

USING THE MULTIRAM C CARD, shows how to use the software included with your MultiRam C Card. Chapter 4 explains how to use MultiRam C’s large memory with AppleWorks. Chapter 5 shows how to use MultiRam C as a fast RAM disk drive for DOS 3.3 and ProDOS. Chapter 6 covers software and hardware compatibility questions.

Part 3

PROGRAMING THE MULTIRAM C CARD, should be read if you intend to develop software using MultiRam C’s memory. If you don’t intend to program MultiRam C yourself, you say skip this section. Chapter 7 details programming techniques required to use the standard //c 64K auxiliary memory bank. Chapter 8 shows how to use all of MultiRam C’s 64K auxiliary memory banks.

Part 4

ThE MULTIRAM C SERVICE GUIDE, should be read by everyone. Chapter 9 describes the MultiRam C warranty. Chapter 10 tells how you can get service if you have a problem and explains RAM replacement and software update policies.

This manual assumes you know how to operate your Apple //c. If you are a new Apple //c owner or if any terms or procedures used in this manual are unfamiliar to you, please refer to your Apple //c owner’s manual for help.