Apple TM546 1.1.2, Software Features, ADSL compliance, ATM features, Bridging features, Services

Chapter 1

Your SpeedTouch™

1.1.2	Software Features
ADSL compliance
	If POTS in overlay: G. handshake, Full Rate ADSL, G.dmt, G.lite (splitterless
	ADSL), ADSL2, RE-ADSL and ADSL2+
	If ISDN in overlay: G.handshake, G.dmt, ADSL2, RE-ADSL and ADSL2+
ATM features
	Up to 16 simultaneous PVCs, allowing multiple simultaneous destinations
	ATM QoS per PVC: CBR, VBR-rt, VBR-nrt, UBR
	RFC 1483 / 2684 multiprotocol encapsulation over AAL5 / ATM: both LLC /
	SNAP and VC-based multiplexing supported
Bridging features
	Multiport self-learning transparent bridge per IEEE 802.1D for LAN interconnect
	Remote bridge ports are isolated from each other
	Pre-defined bridge filters to WAN (no filter, no CPE-to-WAN broadcast, PPPoE
	only) and to LAN (no filter, multicast filter)
Routing features
	Multi-port (up to 16 PVCs) router
	Static routing, automatic routes (PPP, LAN)
	IP address multi-homing
Services
	UPnP with NAT traversal capability:
	enables game technologies (Xbox live, Direct X, and many others)
	enables conferencing functions of Microsoft Messenger
	Transparent bridging (IEEE802.1D)
	PPPoE routing/bridging with integrated PPP Relay
	PPPoA routing, PPPoA-to-PPTP relaying
	IP routing with static routing, packet classified routing and residential RIP
	Hyper-NAT with virtual server mapping (for instance for Web, FTP, Mail
	servers) and ALGs (such as NetMeeting, MSN Messenger, VPN passthrough,
	and others)
	Quality of Service:
	IP QoS
	Integrated Dynamic DNS client
Security
	PAP (RFC1334), CHAP (RFC1994) for PPP session
	Integrated Stateful Inspection Firewall, Intrusion Detection
	Parental Control, URL Filtering
	Multi-level SpeedTouch™ access policies, Digest Authentication
Configuration
	Home Install Wizard, Easy Setup wizard
	Intuitive web-based GUI (HTTP/HTTPs)
	Advanced configuration via telnet - Command Line Interface (CLI)
	Remote management access control
6	E-DOC-CTC-20050429-0100 v1.0