Apple TM546 manual Upgrade Wizard on Setup CD, Introduction Starting the Upgrade Wizard, Chapter

Chapter 5

Software Upgrade

5.1 Upgrade Wizard on Setup CD

Introduction

Starting the Upgrade Wizard

The procedures described in this section are valid only in case: You run an MS Windows Operating System or Mac OS X.

Your SpeedTouch™ and computer are properly connected through Ethernet.

During the upgrade procedure in most cases configuration settings are backed up by the wizard and restored after uploading the system software.

To launch the SpeedTouch™ Upgrade Wizard:

1Insert the Setup CD in your computer’s CD-ROM or DVD-ROM drive. The SpeedTouch™ CD menu will pop up automatically.

If not:

In MS Windows:

Click Run on the Start menu and enter the following path: D:\Setup.exe where D stands for the drive letter of your CD-ROM or DVD-ROM drive.

On Mac OS X

Double-click the CD icon and then double-click Menu.

2Optionally, in the Choose Language window, select the language of your choice and click OK.

3The SpeedTouch™ safety instructions will be displayed in your default web browser. Close the window.

4Select I have read and I fully understand the Safety Instructions and Regularity Information and click Continue.

5In the SpeedTouch™ CD Menu, click SpeedTouch Maintenance.

6Click Upgrade My SpeedTouch, to start the SpeedTouch™ Upgrade Wizard.

7See “ Upgrade procedure” on page 83 to continue.

82 E-DOC-CTC-20050429-0100 v1.0