Arcam AV888, AVR600, AVR500 video, audio connection settings, E-39, English, Entering Setup mode

Models: AV888 AVR500 AVR600

1 74
Download 74 pages 35.94 Kb
Page 41
Image 41
video

video

&audio connection settings

Each input on the AVR500/AVR600/AV888 has multiple connection possibilities for both audio and video, including HDMI, Component Video, digital audio and analogue audio. When an input is selected, by default the AVR500/AVR600/AV888 will select HDMI for both video and audio connections.

Set the Audio Source and Video Source to the connection type you are using: HDMI, Component, S-Video or Composite for video and HDMI, Digital or Analogue for audio.

Entering Setup mode

Before entering the menu, select the input that you wish to change (e.g. dvd). To enter the setup menu, press the amp button followed by the menu button on the remote control. The front panel display shows ‘MENU’ and the setup menu (pictured right) is displayed. Press the remote control E key to enter the Input Config menu then use the Ckey to navigate down to the Video Source option.

Selecting the video source

Once the Video Source option is highlighted as shown, press the ok key to select it for modification. Use the

Band C keys to select from the list the video type you are using on this source.

< HDMI: the unit is forced to use the HDMI video input for this source.

< Component: the unit is forced to use the Component/RGB video input for this source.

< S-Video: the unit is forced to use the S-Video input for this source.

< Composite: the unit is forced to use the Composite video input for this source.

Selecting the audio source

Highlight the Audio Source as shown and press the ok key to select it for modification. Use the B and C keys to select from the list the audio type you are using on this source. NOTE: you may experience some audio transients when changing this setting. As a precaution, we recommend that you reduce the volume level first.

<HDMI: the unit is forced to use the HDMI audio input for this source.

<Digital: the unit is forced to use the optical (TOSLINK) or coaxial (S/PDIF) digital audio input for this source

<Analogue: the unit is forced to use the analogue audio input for this source.

Input Config

General Setup

Auto Setup

Spkr Types

Spkr Distance

Spkr Levels

Video Inputs

Video Outputs

Mode

Zone Settings

Network

Input Config

General Setup

Auto Setup

Spkr Types

Spkr Distance

Spkr Levels

Video Inputs

Video Outputs

Mode

Zone Settings

Network

Colour

Picture Mode

Edge Enhancement

Mosquito NR

Noise Reduction

Block NR

Component Mode

Video

Source

HDMI

 

 

 

 

> Component

 

 

Audio

Source

S-Video

 

 

 

 

Composite

 

 

 

 

 

 

 

 

 

 

 

 

 

Select the type of video: HDMI, Component, S-Video or Composite

Colour

Picture Mode

Edge Enhancement

Mosquito NR

Noise Reduction

Block NR

Component Mode

 

Video

Source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio

Source

 

 

 

 

 

 

 

 

HDMI

 

 

 

 

 

 

 

 

 

 

 

 

> Digital

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analogue

 

 

 

 

 

 

 

 

 

 

 

 

Select the type of audio: HDMI, Digital or Analogue

English

E-39

Page 41
Image 41
Arcam AV888, AVR600, AVR500 audio connection settings, E-39, English, Entering Setup mode, Selecting the video source