Technical specifications
All measurements are with 230V/50Hz mains power
Continuous output power
All channels driven, | 150W per channel; 1.05kW total |
All channels driven, | 230W per channel; 1.62kW total |
One or two channels driven at 1kHz, 8Ω | 160W per channel |
One or two channels driven at 1kHz, 4Ω | 250W per channel |
One or two channels driven at 1kHz, 3.2Ω | 300W per channel |
Peak output current capability |
|
| ±25A per channel |
Total harmonic distortion |
|
At any level up to rated power, into 4 or 8Ω | <0.05% |
Frequency response |
|
| ±0.2dB |
| |
Residual hum and noise |
|
Ref. full power | |
Voltage gain |
|
| x 28.3 (1V input gives 100W/8Ω output) |
Input impedance |
|
| 22kΩ in parallel with 470pF |
Output impedance |
|
| 50mΩ at 20Hz, 1kHz |
| 120mΩ at 20kHz |
Power requirements |
|
| 100, 115V or 230VAC, 50/60Hz, 3kW maximum via heavy duty IEC mains inlet |
| A |
Physical |
|
| Dimensions:W430 x D450 x H180 mm |
| Weight: 31kg (68 lb) nett; 35kg (77 lb) packed |
E&OE |
|
CONTINUAL IMPROVEMENT POLICY
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
NOTE: All specification values are typical unless otherwise stated.
RADIO INTERFERENCE
The P7 is an audio device which has been designed to very high standards of electromagnetic compatibility.
The unit can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the P7 and its connecting cables as far from the tuner and its aerials as possible. Connecting the P7 and the tuner to different mains sockets can also help to reduce interference.
EC COUNTRIES
USA – These products comply with FCC requirements.
12