Ariens 915163 ZOOM XL 42, 915165 ZOOM XL 48 warranty Maintenance Schedule, Interval, Task, Action

Models: 915163 ZOOM XL 42 915173 ZOOM XL 54 915165 ZOOM XL 48

1 36
Download 36 pages 18.58 Kb
Page 17
Image 17
MAINTENANCE SCHEDULE

MAINTENANCE SCHEDULE

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

IMPORTANT: Proper maintenance can prolong the life of unit. The following chart shows the recommended service schedule. Refer to the maintenance instructions in the Engine Manual for additional information.

NOTE: To have full access to the engine, the seat must be tipped forward (see TIPPING SEAT FORWARD on page 18) and the hood opened (see OPENING AND CLOSING HOOD on page 19).

Interval

Task

Action

 

Check

WARNING: Safety interlock system failure and improper

 

Safety

operation of unit can result in death or serious injury. Test

 

Interlock

this system each time the unit is operated. If this system

 

System

does not function as described, do not operate until repairs

 

 

are made (see Safety Interlock System on page 13).

 

 

 

 

Check

Engage parking brake and engage transmission bypass lever (see

 

Parking

MOVING UNIT MANUALLY on page 16). Push unit. If unit rolls,

 

Brake

contact your Ariens Dealer.

 

 

 

 

Clean Unit

Clean engine, battery, seat, mower deck, etc. of all dirt and debris. Do

 

 

not use solvents, hard cleaners, or abrasives.

 

 

NOTE: Protect painted surfaces with automotive type wax.

 

 

IMPORTANT: Do not spray the unit with water, especially when the

 

 

unit is warm from operation. Water can seep into bearings and

 

 

damage them.

 

 

 

Each Use

Check

See for correct tire pressure.

Tires

CAUTION: Avoid injury! Explosive separation of tire and rim

 

 

 

 

parts is possible when they are serviced incorrectly:

 

 

•Do not attempt to mount a tire without the proper equipment

 

 

and experience to perform the job.

 

 

• Do not inflate the tires above the recommended pressure.

 

 

• Do not weld or heat a wheel and tire assembly. Heat can cause

 

 

an increase in air pressure resulting in an explosion. Welding can

 

 

structurally weaken or deform the wheel.

 

 

• Do not stand in front or over the tire assembly when inflating. Use

 

 

a clip-on chuck and extension hose long enough to allow you to

 

 

stand to one side.

 

 

 

 

Check

CAUTION: Check for worn or damaged mower blades.

 

Mower

 

 

Blades

 

 

 

 

GB - 17

Page 17
Image 17
Ariens 915163 ZOOM XL 42, 915165 ZOOM XL 48, 915173 ZOOM XL 54 warranty Maintenance Schedule, Interval, Task, Action