Step Four: Install Remote
Deflector Control Cable
1.Connect the barrel cable end to the chute deflector cable anchor before clipping the cable to the discharge chute cable bracket.
2.Route deflector remote cable along the left side of the chute pedestal.
3.Insert the barrel on the cable end into the bracket on left side of chute deflector.
4.Hold seal out of the way while routing the cable through the bracket on the left side of the discharge chute, and then push the cable fitting into the bracket.
5.Push the seal securely over the end on the cable fitting to prevent water from entering the cable.
6.Check deflector travel. Adjust nut on cable end under handlebar to obtain full travel, if necessary see Remote Deflector Control in Owners Manual.
