Ariston AW 129 important safety instructions Electrical connection, Final installation checklist

Electrical connection

Machine Voltage/Amperage - 120V, 60 Hz, 11 Amp. Connection - 3-prong plug with 6’ cord is provided

with the machine.

Circuit/Protector - 3-wire single phase, 120V, 60 Hz, AC, on a separate 15 Amp circuit.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction, or beakdown, grounding will reduce the risk of electric shock by providing a path for electric current. This appliance is equipped with a cord having an equipment grounding conductor and grounding plug. Plug into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordances. DO NOT modify the plug provided with the applliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Attention !

For your own protection and to prevent accidents, injury and fire, please read the following carefully before installing the washer.

•Installation and grounding must be done in accordan- ce with local codes and by a qualified installer. Instalation instructions provided in this booklet are for the installer’s reference.

•Washer MUST be installed on a strong, level floor and in a protected dry and well-ventilated area close to a power supply and drain outlet of sufficient capacity. DO NOT install on carpet.

Important :

Installation on carpet floors will cause the machine to vibrate and may result in excessive machine vibration during the spin cycles and loss of performance.

•The washer should be plugged into a properly grounded

(3) prong electrical outlet capable of 120 Volt, 60 Hz, and 11 Amp. It shouldn’t be controlled by a wall switch or pull cord which could be turned off accidentally. For your safety, the third or round grounding prong must never be removed. DO NOT USE AN EXTENSION CORD.

•DO NOT install or store this appliance where it will be exposed to weather or in an area where gasoline or other flammables are stored.

Final installation checklist

•Instructions and Installalion Kit have been removed from the tub.

•Shipping straps have been removed.

•Washer is plugged into electrical outlet and is properly grounded.

•Water hoses are connected to the faucets with inlet screens and washers

•Water is turned on and checked for leaks at faucet and water valve connections.

•Drain hose is properly located into drain facility and is not collapsed or damaged.

•Washer has been leveled.

•Test for proper operation by running the washer through a complete cycle at max temperature.

•Shipping bolts removed.

NA

www.aristonappliances.us

9