Ariston Unvented Hot Water Storage Cylinders manual INFORMATION personnel

www.tradeplumbing.co.uk Call Sales On 08708034288

1. GENERALThis manual is an integral and essential part of the product. It should be kept with the appliance so that it can be consulted by the user and our authorised

INFORMATION personnel.

Please read carefully the instructions and notices about the appliance contained in this manual, as they provide important information regarding the safe installation, use and maintenance of the cylinder.

Failure to do so may invalidate the guarantee.

1.2 DELIVERY The Ariston range is available in the following options:

The Wall-hung ProTech range (50, 75, 100 litre models), which are supplied as follows;

One box containing;

1)The cylinder with factory fitted temperature & pressure relief valve, immersion heater and thermostat with thermal cut-out.

One box containing;

1)Unvented control pack (expansion vessel, 2 piece cold water combination valve and tundish), instructions for installation, servicing and use and the Benchmark Log Book).

The Contract ProTech floor-standing range (100, 125, 150, 200 and 300 litre models), which are supplied as follows;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

One box containing;

1)Unvented control pack (expansion vessel, 2 piece cold water combination valve and tundish), motorised valve (indirect only). Immersion heater(s) and thermostat(s) with thermal cut-out(s), cylinder thermostat with thermal cut-out (indirect only), feet (x3), instructions for installation, servicing and use and the Benchmark Log Book.

The High Capacity ProTech floor-standing range (500 litre models), which are supplied as follows;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

1)Unvented control pack (expansion vessel, 2 piece cold water combination valve and tundish), motorised valve (indirect only). Immersion heater(s) and thermostat(s) with thermal cut-out(s), cylinder thermostat with thermal cut-out (indirect only), feet (x 3), instructions for installation, servicing and use and the Benchmark Log Book.

The Classico and Primo floor-standing ranges (125, 150, 200 and 300 litre models).

Are supplied with the following;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

One box containing;

1)Unvented control pack (expansion vessel, 2 piece cold water combination valve and tundish), motorised valve (indirect only). Immersion heater(s) and thermostat(s) with thermal cut-out(s), cylinder thermostat with thermal cut-out (indirect only), feet (x3), instructions for installation, servicing and use and the Benchmark Log Book.

www.tradeplumbing.co.uk Call Sales On 08708034288

3