ArtDio IPC 1000 Series 3. PANEL FEATURES

ARTDio IPP 1000 Series

9

3. PANEL FEATURES

3-1 FRONT PANEL

The IPP Series VoIP Gateway is a 19 inch modularized unit.

Each unit has 2 Ethernet ports, 1 console port, LED indicators, and, SMDR call recording port (for

comprehensive calling records).

Front Panel- 4FXO + 12 FXS ports

3-2 REAR PANEL

The IPP Series rear panel consists of only a fan vent, and re-set button (for service technician

use only)

3-3 MODULES

The IPP incorporates two modules：4 FXO + 4 FXS、8 FXS.

The front panels for these modules are shown below.

4 FXO + 4 FXS

8 FXS

Contents

Main Page Table of Contents Page Page Page 1. PREFACE 1-1 PBX Function 1-2 ADDITIONAL IPP FEATURES 2. PACKAGE CONTENTS 3. PANEL FEATURES 3-1 FRONT PANEL 3-2 REAR PANEL 3-3 MODULES 3-3.1 INDICATOR DESCRIPTION 3-3.2 PORT DESCRIPTION 4. BASIC INSTALLATION 4-2 CONFIRMING and/or CHANGING REGION ID 4-2.1 HOW TO OBTAIN AN IP ADDRESS 4-2.2 SETTING THE IP 4-2.3 SETTING THE WEB PAGE PASSWORD 4-2.4 SETTING THE PHONE NUMBER Page 5. SETTING FUNCTIONS 5-1 Inter-System Calls 5-1.1 SETTING EXTENSION NUMBERS 5-2 CALLING OUTSIDE LINES 5-2.1 Assigning Trunk Group Access Code 5-2.2 Assigning In-Coming FXO line to a Trunk Group 5-3 Call Transfer 5-4 Call Pickup 5-5 Call Forward 5-6 Operator 5-7 Speed Dial Page 5-8 VoIP Calls Budget Control 5-9 Outbound Transit Calls Page 5-10 Inbound Transit Calls 5-11 INTER-CONNECTING WITH OTHER IPH/ IPE UNITS 5-12 SYSTEM FUNCTION 5-12.1 Auto Attendant (Built-in DISA) 5-13 Numbering Plan 5-14 Barring Classes 5-14.1 Create a Barring Class 5-14.2 Changing a Barring Class Attribute 5-14.3 Assign Barring to a Extension 5-15 CALLING RECORD SMDR 5-16 FAX OPERATION 6. WEBPAGE EXPLANATION 6-1 Basic 6-1.1 General 6-1.2 Inbound Transit 6-1.3 Outbound Transit 6-1.4 Off-net Forward 6-1.5 Speed Dial 6-1.6 Barring Class Section Item Field Description Default : 6-2 IP Settings Page 6-3 Advanced 6-3.1 General 6-3.2 Numbering Plan 6-3.3 Trunk Group 6-4 Channel 6-4.1 Summary 6-4.2 Configuration 6-5 Phone Book 6-6 Access Code Page 7. Special Applications 7-1 Using NAT Via Private IP IPP can be configured as a private IP address and inter-connected with other IPH/IPE units. 7-1.1 Virtual Servers on the IP sharing device 7-1.2 Tested IP Sharing Devices 7-1.3 IP Sharing Devices Not Recommended 7-2 Firewall 8. FILE MANAMEMENT 8-1 File Type 8-1.1 File Update Using FTP Page Page 9. NETWORK MANAGEMENT 9-1 Use Of The System Console 9-1.1 System Command Summary 9-2 Use Of The Web Management Page 9-3 Management Via telephone 9-3.1 Command Summary Item Parameter 10. INTER-CONNECTION VIA IPN 10-1 IPN Control Port 10-2 IPP Setting IPN IP Page 11. Specifications 12. Appendix 12-1 List of Region ID By Country