ARTDio IPP 1000 Series
14
4-2.3 SETTING THE WEB PAGE PASSWORD
Before entering the WEB Management Page first set the password to prevent unauthorized use.
The password can be 1-6 letters or digits, for example ‘123’. The IPP series requires a password
otherwise the web management interface cannot be used.
Use the console to set the password：
IPP >enable
IPP #configure
Enter configuration commands, one per line. End with CNTL/Z
IPP (config)#password web_write password 123
IPP (config)#exit
4-2.4 SETTING THE PHONE NUMBER
The IPP can accommodate four in-coming lines, however, when setting the phone number,
only one number is required.
Go to the IPP website, by entering the IP address. You will see a page such as the example
below. Type in the user ID (default is WEB) and the password previously set, select Enter, and you
will access the web management page.