ArtDio IPC 1000 Series 6-1.1 General

ARTDio IPP 1000 Series
37
6-1.1 General
Section Item Field Description Default
Region ID Refers to the country in which the
unit is operating
(Read Only)
Software Version Displays the software version (Read Only)
BootRom Version Displays the BootRom version (Read Only)
Hardware Version Displays the Hardware version (Read Only)
Card Type 1 Displays the type of card 1 (Read Only)
Card Type 2 Displays the type of card 2 (Read Only)
Up-Time Indicates time the unit has been
running since connection
(Read Only)
Information
MAC Address Indicates the MAC address (Read Only)
Time Source Select ‘AutoSync’ or Manual ‘AutoSync’
Date With the time source field set to ‘Manual’, set the
date：yyyy/mm/dd.
None
Time With the time source field set to ‘Manual’, set the
time：hh/mm/ss.
None
Time Zone Select the city th e un it is in from the ‘Time Zone’
field drop-down box.
Time
Configuration
Day Light Saving Select ’On’ or ‘Off’ in the ‘Day Light Saving’field
drop-down box.
OFF
Control Port Control the IP connection signal, set the code in
the field (0 – 65535). (Requires Warm-Restart)
2000
VoIP Base Port Control the VoIP connection signal, set the code in
the field (0 – 65534).
Note：
1) all numbers must be even
2) the warm-restart must be engaged to change
the code
4000
Greeting Mode Select ‘On’ or ‘Off’ in the ‘Greeting Mode’ field
drop-down box.
ON
Configuration
Transit Call Select ‘Enable’ or ‘Disable’ in the ’ Transit Call’
field drop-down box
Enable
Country Code Set the country code of the country the unit is
operating in.
The Region ID will set
the code
Area Code Enter the local area code. None
Phone Number Enter the Phone Number of IPP unit None
My Phone
Number
IPN ID IPN ID (Read Only)
None
System Restart Restart Mode Select the system restart mode
‘None’ /’ Cold Restart’ / ‘Warm Restart’.
None