ArtDio IPC 1000 Series 4-2.2 SETTING THE IP

ARTDio IPP 1000 Series

13

IP Environment Required Information

Public IP address IP address

Subnet mask

Default Gateway

It is recommended that you obtain an IP address from

MIS staff in order to prevent an IP conflict.

Static IP

Private IP address IP address

Subnet mask

Default Gateway

It is recommended that you obtain an IP address from

MIS staff in order to prevent an IP conflict.

Note：Your private IP requires an IP sharing device, and

this device must be configured to treat the IPP unit, and

the IP it is using as a ‘virtual server’.

Dynamic IP Address (DHCP) DHCP Mode

PPPoE Account Number

Password

This information is normally provided by your ISP . If

you don’t have this information, contact your ISP.

4-2.2 SETTING THE IP

The IP address can be set via the console, or the Web Management Page.

To use the console, use the following procedure：

IPP >enable

IPP #configure

Enter configuration commands, one per line. End with CNTL/Z

IPP (config)#ip state user

IPP (config)#ip address 210.62.149.250 255.255.255.128

System needs to restart

IPP (config)#ip default-gateway 210.62.149.254

IPP (config)#exit

IPP #restart

This command resets the system. System will restart operation code agent.

Reset system, [Y]es or [N]o? Yes

Contents

Main Page Table of Contents Page Page Page 1. PREFACE 1-1 PBX Function 1-2 ADDITIONAL IPP FEATURES 2. PACKAGE CONTENTS 3. PANEL FEATURES 3-1 FRONT PANEL 3-2 REAR PANEL 3-3 MODULES 3-3.1 INDICATOR DESCRIPTION 3-3.2 PORT DESCRIPTION 4. BASIC INSTALLATION 4-2 CONFIRMING and/or CHANGING REGION ID 4-2.1 HOW TO OBTAIN AN IP ADDRESS 4-2.2 SETTING THE IP 4-2.3 SETTING THE WEB PAGE PASSWORD 4-2.4 SETTING THE PHONE NUMBER Page 5. SETTING FUNCTIONS 5-1 Inter-System Calls 5-1.1 SETTING EXTENSION NUMBERS 5-2 CALLING OUTSIDE LINES 5-2.1 Assigning Trunk Group Access Code 5-2.2 Assigning In-Coming FXO line to a Trunk Group 5-3 Call Transfer 5-4 Call Pickup 5-5 Call Forward 5-6 Operator 5-7 Speed Dial Page 5-8 VoIP Calls Budget Control 5-9 Outbound Transit Calls Page 5-10 Inbound Transit Calls 5-11 INTER-CONNECTING WITH OTHER IPH/ IPE UNITS 5-12 SYSTEM FUNCTION 5-12.1 Auto Attendant (Built-in DISA) 5-13 Numbering Plan 5-14 Barring Classes 5-14.1 Create a Barring Class 5-14.2 Changing a Barring Class Attribute 5-14.3 Assign Barring to a Extension 5-15 CALLING RECORD SMDR 5-16 FAX OPERATION 6. WEBPAGE EXPLANATION 6-1 Basic 6-1.1 General 6-1.2 Inbound Transit 6-1.3 Outbound Transit 6-1.4 Off-net Forward 6-1.5 Speed Dial 6-1.6 Barring Class Section Item Field Description Default : 6-2 IP Settings Page 6-3 Advanced 6-3.1 General 6-3.2 Numbering Plan 6-3.3 Trunk Group 6-4 Channel 6-4.1 Summary 6-4.2 Configuration 6-5 Phone Book 6-6 Access Code Page 7. Special Applications 7-1 Using NAT Via Private IP IPP can be configured as a private IP address and inter-connected with other IPH/IPE units. 7-1.1 Virtual Servers on the IP sharing device 7-1.2 Tested IP Sharing Devices 7-1.3 IP Sharing Devices Not Recommended 7-2 Firewall 8. FILE MANAMEMENT 8-1 File Type 8-1.1 File Update Using FTP Page Page 9. NETWORK MANAGEMENT 9-1 Use Of The System Console 9-1.1 System Command Summary 9-2 Use Of The Web Management Page 9-3 Management Via telephone 9-3.1 Command Summary Item Parameter 10. INTER-CONNECTION VIA IPN 10-1 IPN Control Port 10-2 IPP Setting IPN IP Page 11. Specifications 12. Appendix 12-1 List of Region ID By Country