ArtDio IPC 1000 Series 5-8 VoIP Calls Budget Control

ARTDio IPP 1000 Series

26

5-8 VoIP Calls Budget Control

IPP series units operate under the G.729AB protocol with voice packets of 40ms with each

voice line using a bandwidth of 12K bps. Thus with the full capacity of IPP series’ 12 lines, the

requirement would be 144 bps (for voice only, not including any other data flow). Therefore the

VoIP volume must be limited to accommodate your system’s bandwidth.

Setting the VoIP Calls Lim it：

Select ‘ADVANCED \ NUMBERING PLAN’ on the Web Management Page

 In the Access Codes section, enter the IP call limit in the ‘IP Calls’ field.

 Click ‘Apply’

Contents

Main Page Table of Contents Page Page Page 1. PREFACE 1-1 PBX Function 1-2 ADDITIONAL IPP FEATURES 2. PACKAGE CONTENTS 3. PANEL FEATURES 3-1 FRONT PANEL 3-2 REAR PANEL 3-3 MODULES 3-3.1 INDICATOR DESCRIPTION 3-3.2 PORT DESCRIPTION 4. BASIC INSTALLATION 4-2 CONFIRMING and/or CHANGING REGION ID 4-2.1 HOW TO OBTAIN AN IP ADDRESS 4-2.2 SETTING THE IP 4-2.3 SETTING THE WEB PAGE PASSWORD 4-2.4 SETTING THE PHONE NUMBER Page 5. SETTING FUNCTIONS 5-1 Inter-System Calls 5-1.1 SETTING EXTENSION NUMBERS 5-2 CALLING OUTSIDE LINES 5-2.1 Assigning Trunk Group Access Code 5-2.2 Assigning In-Coming FXO line to a Trunk Group 5-3 Call Transfer 5-4 Call Pickup 5-5 Call Forward 5-6 Operator 5-7 Speed Dial Page 5-8 VoIP Calls Budget Control 5-9 Outbound Transit Calls Page 5-10 Inbound Transit Calls 5-11 INTER-CONNECTING WITH OTHER IPH/ IPE UNITS 5-12 SYSTEM FUNCTION 5-12.1 Auto Attendant (Built-in DISA) 5-13 Numbering Plan 5-14 Barring Classes 5-14.1 Create a Barring Class 5-14.2 Changing a Barring Class Attribute 5-14.3 Assign Barring to a Extension 5-15 CALLING RECORD SMDR 5-16 FAX OPERATION 6. WEBPAGE EXPLANATION 6-1 Basic 6-1.1 General 6-1.2 Inbound Transit 6-1.3 Outbound Transit 6-1.4 Off-net Forward 6-1.5 Speed Dial 6-1.6 Barring Class Section Item Field Description Default : 6-2 IP Settings Page 6-3 Advanced 6-3.1 General 6-3.2 Numbering Plan 6-3.3 Trunk Group 6-4 Channel 6-4.1 Summary 6-4.2 Configuration 6-5 Phone Book 6-6 Access Code Page 7. Special Applications 7-1 Using NAT Via Private IP IPP can be configured as a private IP address and inter-connected with other IPH/IPE units. 7-1.1 Virtual Servers on the IP sharing device 7-1.2 Tested IP Sharing Devices 7-1.3 IP Sharing Devices Not Recommended 7-2 Firewall 8. FILE MANAMEMENT 8-1 File Type 8-1.1 File Update Using FTP Page Page 9. NETWORK MANAGEMENT 9-1 Use Of The System Console 9-1.1 System Command Summary 9-2 Use Of The Web Management Page 9-3 Management Via telephone 9-3.1 Command Summary Item Parameter 10. INTER-CONNECTION VIA IPN 10-1 IPN Control Port 10-2 IPP Setting IPN IP Page 11. Specifications 12. Appendix 12-1 List of Region ID By Country