6.2. Protocol
|
| Protocol |
| Field | Description |
|
| |
| protocol | Select a protocol from the drop down list used by the phone: |
| z H.323: Select this option to set the phone use H.323 protocol | |
|
| z SIP: Select this option to set the phone use SIP protocol |
|
| z MGCP: Select this option to set the phone use MGCP protocol |
|
| Enable/Disable service by checking/unchecking this box. Different service responses different |
|
| protocol as follows: |
|
| z With SIP protocol used, the protocol service refers to SIP Proxy Server. Check this box |
|
| according to system and then fill service address field with SIP proxy Server IP address |
|
| of domain name. |
|
| z With H.323 protocol used, the protocol service refers to the gatekeeper searching the |
|
| address. |
|
| To allow the |
|
| and then fill the IP address or domain name of corresponding gatekeeper into the |
| use service | Service Address field. |
| To make point to point calls to another voice gateway: Please do not check this | |
|
| |
|
| option and fill up the voice gateway’s IP address in the Service Addr. field. |
|
| To make calls by dialing IP address of other |
|
| Netmeeting) at the same network segment, do not check this option and leave the |
|
| Service Addr. field blank. |
|
| ※ If gatekeeper is not to be used, please configure the service port as 1720. Detailed |
|
| information please refers to the Service Port configuration. |
|
| z With MGCP protocol used, the protocol service refers to Call Agent. Please check this |
|
| box according to system, and then fill service address field with Call Agent IP address |
|
| or domain name. |
| service type | The default service type is common. For other requests, please find the service type in the |
| drop down list. | |
|
| |
| service addr | Fill up the IP address or domain name of server corresponding to the protocol been used. |
|
| 16 |
