IPF-2000 User Manual
18
z With H.323 protocol used,
If the gatekeeper is used, the register port works as the gatekeeper’s monitor port.
The default value is 1719.
If the gatekeeper is used, the register port works as the end point device or the
gatekeeper’s monitor port. The default value is 1720.
z With MGCP protocol used, this port is the Call Agent’s receive port. The default value is
2727.
z With SIP protocol used, the default setting is 5060.
signal port With H.323 protocol used, this port is mapped to the Q.931 port. For H.323, the Q.931 call
usually uses TCP protocol. The value can be set between 1024 and 65535.
control port
z With H.323 protocol used, this port is H.245 port using TCP protocol. H.245 protocol
defined call control signal, and uses TCP protocol. The value can be set between 1024
and 65535.
z With MGCP and SIP protocol used, there is no specific request for this port. Please fill
in any number.
※If there are many IPF-2000 traversing in the NAT at the same time, each IPF-2000
should be assigned with different port number.
register ttl This defines how many seconds a register message will be sent to the server. The default
setting is 60 second.
rtp tos Fill TOS segment of IP header in RTP digital follow here. Detailed information please refer to
IP protocol.
rtp port RTP port is the port transferring and receiving voice flow using UDP protocol. Please fill an
even number between 1024 and 65535 into this field.
local type
With H.323 protocol used, this parameter refers to how IPF-2000 log in gatekeeper or SIP
Proxy server. The meaning of each item is as follow:
z Phone number
Use phone number as E.164 and H.323 ID to login the Gatekeeper.
z Account
Use account authentication to login. Please also fill up the account name and password into
the account and pin fields.
z H.235 account
With H.323 protocol used, if the Gatekeeper supports H.235 protocol, please choose this
option. Please also fill up the account name and password into the account and pin fields.
call type Set call type by selecting the items in drop-down list. There are three options: normal,
faststart, advanced. The recommended way is advanced.
dtmf
Set DTMF signal sending way by selecting control string, inband audio, signal keypad or RFC
2833 from drip-down menu.
If you can not dial the extensions, please set the dtmf as inband audio.