Ask Proxima 9280 CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR, PREPARATION, ADJUSTABLE FEET, MOVING THE PROJECTOR

PREPARATION

ADJUSTABLE FEET

Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 9.0 degrees.

1	Lift the front of the projector and pull the FEET LOCK
	LATCHES on both sides of the projector.
2	Release the FEET LOCK LATCHES to lock the
	ADJUSTABLE FEET and rotate the ADJUSTABLE FEET
	to fine tune the position and the tilt.
3	To shorten the ADJUSTABLE FEET, lift the front of the
	projector and pull and undo the FEET LOCK LATCHES.

The position and the keystone distortion of the image can
be adjusted using the Menu Operation. (Refer to P 22,
31 and 35.)	FEET LOCK
		ADJUSTABLE FEET
	LATCHES

MOVING THE PROJECTOR

Use the Carry Handle when moving the Projector.

When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet.

When this projector is not in use for an extended period, put it into the case (dust cover) supplied with this projector.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

●Do not drop or bump the projector, otherwise damages or malfunctions may result.

●When carrying the projector, use a suitable carrying case.

●Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for best way.

10