CONNECTING THE PROJECTOR
OUTPUT TERMINALS
RESET BUTTONR/C JACK

This projector uses a micro processor to control the unit. Occasionally, the micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

When using the Wired / Wireless Remote Control Unit as the Wired Remote Control, Connect the Wired Remote Control Unit to this jack with the Remote Control Cable (supplied). (Refer to page 21.)

monitor OUT

 

 

 

 

 

R–audio–L video

R

G

B

H

V

reset

 

 

 

 

 

R/C jack

COMPUTER MONITOR OUTPUTJACKS (BNC x 5)

These jacks output the signal from the COMPUTER INPUT terminals (except the digital input signal). Connect an external monitor to these jacks. (Refer to P14.)

AUDIO OUTPUT JACKS

 

VIDEO MONITOR OUTPUT JACK

 

Connect an external audio

 

This terminal outputs the composite video

amplifier to these jacks.

 

signal or the signal from the S-VIDEO

(Refer to P13, 14.)

 

INPUT JACK. Connect an external

 

 

monitor to this jack. (Refer to P13.)

12