PREPARATION

NAME OF EACH PART OF THE PROJECTOR

FRONT OF THE CABINETTOP CONTROLSAND INDICATORSPROJECTION LENS
LENS COVERSPEAKERS
BACK OF THE CABINETEXHAUST VENT HOT AIR EXHAUSTED !

Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep the rear grills at least 3’(1m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while the projector is used.

This projector detects the internal temperature and automatically controls the operating power of the Cooling Fans.

POWER CORD CONNECTOR
INFRAREDREMOTE RECEIVERSTERMINALSAND CONNECTORSMAIN ON / OFF SWITCH
BOTTOM OF THE CABINETAIR INTAKE VENTS (Side and Bottom)

This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

●Do not cover the vent slots.

●Keep bottom clear of any objects. Obstructions may block cooling air.

LAMP COVER
ADJUSTABLE FEETANDFEET LOCK LATCHES

7