COMPUTER MODE

SELECTING COMPUTER MODE

DIRECT OPERATION

Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit.

 

MENU OPERATION

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

 

Computer and press the SELECT button. Another dialog box

 

COMPUTER MODE Menu will appear.

2

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the mode either Computer 1 or

Computer 2, and then press the SELECT button.

CURRENT MODE DISPLAY

When selecting the Computer Mode, the Current Mode display appears to show the information of the computer being selected.

 

 

MODE button

COMPUTER button

 

 

COMPUTER 1

 

 

 

COMPUTER 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMPUTER 2

 

 

 

 

 

 

 

COMPUTER 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

Providing the information of the computer detected by the projector.

SELECTING COMPUTER SYSTEM

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 25). When selecting Computer, this projector automatically tunes to the incoming signal and projects the proper image without any special settings. (Setting of the Computer System may be required when connecting some computers.)

Note : The projector may display one of the following messages.

Go to PC adj.

The projector cannot discriminate or detect the input

 

signal from the computer. Adjust and set the

 

 

computer system manually. (Refer to page 26.)

 

There is no signal input from the computer. Make

No signal

 

sure the connection of the computer and the

 

 

projector is set correctly.

 

(Refer to TROUBLESHOOTING on page 42.)

SELECT COMPUTER SYSTEM MANUALLY

To set the Computer system manually, select the mode on the

SYSTEM BOX

Display the SYSTEM being selected.

The system being selected.

ON-SCREEN MENU.

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

 

SYSTEM and press the SELECT button. Another dialog box

 

COMPUTER SYSTEM Menu will appear.

2

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the system that you want to set, and

then press SELECT button.

The systems on this dialog box can be selected.

When this mark is displayed as black, more computer system modes will be available. Move the arrow to this mark and then press the SELECT button, and the other modes will be displayed.

Close the SYSTEM Menu.

24