Aspire Digital 2020, 2010 manual Ovp, Esd

LCD

Item				Specification
Suspend/Standby control	Yes			Yes	Yes	Yes
Electrical Specification
Supply voltage for LCD	3.3			3.3	3.3	3.3
display (V)
Supply voltage for LCD	690			690	690	690
backlight (Vrms)
AC Adapter
Item				Specification
Vendor & model name		Delta ADP-65DB
		Liteon PA-1650-02CR
Input Requirements
Maximum input current (A,		1.5A max@3.5A/100Vac and 240 Vac
@100Vac, full load)
Nominal frequency (Hz)		47 - 63
Frequency variation range		47 - 63
(Hz)
Nominal voltages (Vrms)		90 - 264
Inrush current		The maximum inrush current will be less than 50A and 100A when
		the adapter is connected to 100Vac(60Hz) and 240Vac(50Hz)
		respectively.
Efficiency		High efficiency 85% minimum, at 100~240Vac AC input, full load,
		warm-up condition.
Output Ratings (CV mode)
DC output voltage		Offers constant voltage 19.0V output source with 65W max output
		power capacity.
Noise + Ripple		300mvp-pmax (20MHz bandwidth) for resistor load
Output current		0 A (min.)	3.5A (max.)
Output Ratings (CC mode)
DC output voltage		18.0 ~ 20.0
Constant output		3.5A
Dynamic Output Characteristics
Start-up time		3 sec. (@115 Vac and 230Vac full load)
Hold up time		5ms min. (@115 Vac input, full load)
Over Voltage Protection		25V
(OVP)
Short circuit protection		Output can be shorted without damage, and auto recovery
Electrostatic discharge		15kV (at air discharge)
(ESD)		8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary		4242 Vdc for 1 second
Leakage current		60uA at 240Vac/60Hz
Regulatory Requirements		1. FCC class B requirements (USA)
		2. VDE class B requirements (German)
		3. VCCI classII requirements (Japan)

Chapter 1 39